Installation¶
This section will help you set up the tools and programs needed for developing programs and firmware to flash to the BBC micro:bit using MicroPython.
Dependencies¶
Development Environment¶
You will need:
- git
- yotta
Depending on your operating system, the installation instructions vary. Use the installation scenario that best suits your system.
Installation Scenarios¶
Windows¶
When installing Yotta, make sure you have these components ticked to install.
- python
- gcc
- cMake
- ninja
- Yotta
- git-scm
- mbed serial driver
OS X¶
Linux¶
These steps will cover the basic flavors of Linux and working with the micro:bit and MicroPython. See also the specific sections for Raspberry Pi, Debian/Ubuntu, and Red Hat Fedora/Centos.
Debian and Ubuntu¶
sudo add-apt-repository -y ppa:terry.guo/gcc-arm-embedded
sudo add-apt-repository -y ppa:pmiller-opensource/ppa
sudo apt-get update
sudo apt-get install cmake ninja-build gcc-arm-none-eabi srecord
pip3 install yotta
Red Hat Fedora/CentOS¶
Raspberry Pi¶
Next steps¶
Congratulations. You have installed your development environment and are ready to begin flashing firmware to the micro:bit.